I use UBNT as a repeater by using a NanoM that has a secondary Ether and plug a second radio in it pointing to where I want to go and set it also as an AP, not WDS, with a different channel. Gets me around "corners" as in clumps of trees or whatever. Never had the SSID blank but I have set some SSID to ANY which will allow anyone to connect with zero security.
Albert- (Formally Bob) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Greg Ihnen Sent: Tuesday, October 12, 2010 9:54 PM To: WISPA General List Subject: [WISPA] UBNT repeater I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
