1 person on each end with a small hand-held mirror. Flash the person on the other tower. When it's sunny out, you'd be surprised how far away you can see that.
On Wed, Oct 20, 2010 at 12:39 PM, Chuck Profito <cprof...@cv-access.com>wrote: > Well in my area if its e-w about a turn, n-s 2 or 3. But what do I > know, Tim's doing the turning, I'm calling the signal levels to him. I'm > the tower bender! :-) > > > > *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On > Behalf Of *Josh Luthman > *Sent:* Wednesday, October 20, 2010 11:05 AM > > *To:* WISPA General List > *Subject:* Re: [WISPA] PtP Dish Alignment > > > > So it's 50 foot higher and 10 miles away...what angle is that? > > On Oct 20, 2010 1:38 PM, "Chuck Profito" <cprof...@cv-access.com> wrote: > > Come on Josh, > > > > get a couple of land marks from Google Earth, that takes care of left and > > right, and Google Earth tells you altitude at the base of each plus your > > height, now it's just up or down from level, a few turns. > > > > Google is your friend! > > > > > > > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > > Behalf Of Josh Luthman > > Sent: Wednesday, October 20, 2010 10:02 AM > > To: WISPA General List > > Subject: Re: [WISPA] PtP Dish Alignment > > > > > > > > I just filled a printer page with trig figuring out hoe I'm going to > place > > my projector. There are more uses then people think. > > > > On Oct 20, 2010 12:55 PM, "Mark Nash" <markl...@uwol.net> wrote: > >> YES!!!!!!!!!!!! LOL ;) > >> > >> Only once did I know of a a practical use for trig. A friend of mine was > > trying to make a cut pattern in sheet metal to make a cone. The cone had > to > > fit a certain size at the top and a certain size at the bottom. > >> > >> The cone was a pivotal part of his home brewing system. He is the kind > of > > guy who can buy this stuff pre-made but preferred to do it himself. I > don't > > have that kind of time on my hands, I just buy the stuff. Though he is a > bit > > prouder of HIS homebrew system than I am, and that's the difference. > Nobody > > else who opens my fridge knows, though. > >> ----- Original Message ----- > >> From: Josh Luthman > >> To: WISPA General List > >> Sent: Wednesday, October 20, 2010 9:16 AM > >> Subject: Re: [WISPA] PtP Dish Alignment > >> > >> > >> Am I the only one that uses Trigonometry for vertical alignment? > >> > >> Josh Luthman > >> Office: 937-552-2340 > >> Direct: 937-552-2343 > >> 1100 Wayne St > >> Suite 1337 > >> Troy, OH 45373 > >> > >> > >> permail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/