I had a 300 foot vertical run of shielded, FLOODED cable that I never terminated, as in.. No connector at the bottom.. Sat for the entire summer. The result? Nothing. Was as stable as in December. The cable I use is not like the old paraffin based gel, more of a lotion but still sticky. However, neither one ever out flowed for me.
For us, flooded and shielded is a no brainer. I don't allow any other cable in our shop for outdoor install no matter what. It's been a slam dunk winner. Albert- From: [email protected] [mailto:[email protected]] On Behalf Of Justin Wilson Sent: Saturday, November 13, 2010 10:51 PM To: WISPA General List Subject: Re: [WISPA] a more simple way to crimp Shielded Rj45 on shieldedcable I have seen gel cable turn to liquid on towers. Not truly designed for vertical use. -- Justin Wilson <[email protected]> http://www.mtin.net/blog - xISP News http://www.twitter.com/j2sw - Follow me on Twitter Wisp Consulting - Tower Climbing - Network Support _____ From: RickG <[email protected]> Reply-To: WISPA General List <[email protected]> Date: Sat, 13 Nov 2010 22:48:28 -0500 To: WISPA General List <[email protected]> Subject: Re: [WISPA] a more simple way to crimp Shielded Rj45 on shieldedcable I'm not sure how well shielded will prevent water flow. On Sat, Nov 13, 2010 at 11:04 AM, <[email protected]> wrote: It's just not flooded. It's shielded cable. Chris From: RickG <mailto:[email protected]> Sent: Saturday, November 13, 2010 12:04 AM To: WISPA General List <mailto:[email protected]> Subject: Re: [WISPA] a more simple way to crimp Shielded Rj45 on shieldedcable What does it use instead of gel? On Sat, Nov 13, 2010 at 12:05 AM, Chris Hudson <[email protected]> wrote: I don't use gel filled. I use Belden 1300A and it doesn't give he much trouble at all. Chris > The biggest problem for me is the sticky gel. I take some isopropyl > alcohol wipes up to clean the wires off and that helps a lot. > > On Fri, Nov 12, 2010 at 7:42 PM, <[email protected]> wrote: > >> I've had to do this several times 300' in the air. Just grin and bear >> it. I >> don't see any way to improve the jacket fitting in. >> >> Chris >> >> -----Original Message----- >> From: support >> Sent: Friday, November 12, 2010 4:41 PM >> To: [email protected] ; WISPA General List >> Subject: [WISPA] a more simple way to crimp Shielded Rj45 on shielded >> cable >> >> is there a more simple way to crimp Shielded Rj45 on shielded Cat5 >> cable >> >> getting the jacket to fit in the Rj-45 end is vary hard 100ft in the air >> on a tower >> >> anyone have tips or tricks or know of better fitting ends? >> >> Thanks >> >> -- >> >> >> Tim Steele >> >> [email protected] >> >> NITLine Support >> >> (574) 772-7550 ext 103 >> >> www.NITLine.net <http://www.NITLine.net> >> >> >> >> >> ---------------------------------------------------------------------------- ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> ---------------------------------------------------------------------------- ---- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> ---------------------------------------------------------------------------- ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> ---------------------------------------------------------------------------- ---- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > -- > -RickG > > > ---------------------------------------------------------------------------- ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- -RickG _____ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- -RickG _____ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
