I'm thinking of putting the additional Omni to try to ease things. If things work out well, then I'll just install other panels on 10mhz and any new install would be on 10mhz. Also, keep those old equipment on the 20mhz panels since we don't have the funds to replace them.
Don't know if having 4 panels on 20mhz and probably 3 other sector on 10mhz might interfere. That's why my question about if having both on the same tower and closed to each other may cause problems. On Thu, 2010-12-02 at 10:39 -0500, Faisal Imtiaz wrote: > Are you thinking about putting the additional Omni/Bullet as a temp > solution to decommission the older radio/sector to some newer radio / > sectors ? > > You will have to try it.. you might be able to do that.... > > If you are thinking of this as a long term solution... then keep in mind > "Omni Antenna(s), Noise from All Sides..." are two dirty words that are > a disaster waiting to happen .. .kinda like 'drinking & driving'. > > :) > > Faisal Imtiaz > Snappy Internet & Telecom > > > On 12/2/2010 10:29 AM, Optimum Wireless Services wrote: > > We have 4 sector antennas on a couple of our towers but, they're getting > > too much noise and interference from all over the area. I'm wanted to > > install a bullet on each tower at 10Mhz so, I can transfer many of our > > ns2 to it. I can't do it on the panels because we have older equipment > > that don't support 10mhz. Can't go to 5.8ghz becuase we still don't have > > any 5.8 radio. > > > > I'm looking for ways to decrease latency which at times are extremely > > high, over 1000ms (very ridiculous). > > > > I have a tower with an omni on it and would like to add another omni on > > this one to try to do the same as with the others. > > > > > > On Thu, 2010-12-02 at 09:58 -0500, Cameron Kilton wrote: > >> Why do that next to each other, I don't see the point of two omni's next > >> to each other and 10mhz and 20 mhz, why not sectors? > >> > >> > >> Thanks, > >> Cameron Kilton > >> Project Manager > >> Midcoast Internet Solutions > >> http://www.midcoast.com > >> c...@midcoast.com > >> (207) 594-8277 x 108 > >> > >> On 12/2/2010 9:57 AM, Optimum Wireless Services wrote: > >>> Also, both antennas might be installed on the same tower next to each > >>> other. > >>> > >>> > >>> On Thu, 2010-12-02 at 10:50 -0400, Optimum Wireless Services wrote: > >>>> I guess both on different channels: 20mhz on channel 1 and the other on > >>>> channel 9. > >>>> > >>>> > >>>> On Thu, 2010-12-02 at 08:44 -0600, Cameron Crum wrote: > >>>>> What channels? > >>>>> > >>>>> On Thu, Dec 2, 2010 at 8:39 AM, Optimum Wireless Services > >>>>> <wil...@optimumwireless.com> wrote: > >>>>> Hello. > >>>>> > >>>>> Just a quick stupid question: > >>>>> > >>>>> If I have two omni antennas both transmitting at 2.4GHz but, > >>>>> one with > >>>>> 10MHz channel width and the other with normal 20MHz width; > >>>>> would they > >>>>> interfere with each other? > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> -------------------------------------------------------------------------------- > >>>>> WISPA Wants You! Join today! > >>>>> http://signup.wispa.org/ > >>>>> > >>>>> -------------------------------------------------------------------------------- > >>>>> > >>>>> WISPA Wireless List: wireless@wispa.org > >>>>> > >>>>> Subscribe/Unsubscribe: > >>>>> http://lists.wispa.org/mailman/listinfo/wireless > >>>>> > >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>>>> > >>>> > >>>> > >>>> > >>>> -------------------------------------------------------------------------------- > >>>> WISPA Wants You! Join today! > >>>> http://signup.wispa.org/ > >>>> -------------------------------------------------------------------------------- > >>>> > >>>> WISPA Wireless List: wireless@wispa.org > >>>> > >>>> Subscribe/Unsubscribe: > >>>> http://lists.wispa.org/mailman/listinfo/wireless > >>>> > >>>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >>> > >>> > >>> -------------------------------------------------------------------------------- > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> -------------------------------------------------------------------------------- > >>> > >>> WISPA Wireless List: wireless@wispa.org > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >>> > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
