> We recently upgraded a link and started having some packet loss. Looking at > the manged switch, it was obvious the CMM on that tower was getting ethernet > errors. Auto negotiation on GigE switches is flaky as hell. This is the > second time in a month I've had to hard code both ends. This has occurred > on both Cisco and HP Procurve hardware.
GigE auto-neg not working is a hint pointing to bad cable, interference and/or defective hardware. Unlike Fast-Eth, Gig-E autoneg works and you lose link quality monitoring by disabling it. Rubens -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/