The reset switch only works when booting the unit. "Connect the Ethernet Cable and immediately press the Reset button (near the device’s RJ45 connector) for 10 seconds."
And yes, the openmesh stuff does work, but stick to the pico2hp hardware. ryan On Fri, Feb 4, 2011 at 3:57 PM, Charles N Wyble <char...@knownelement.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Is it just me, or are the reset switches on the ns2 just about worthless? > > Anyone here got mesh over wifi working on an ns2? Looks like I'm going > to have to go that route, as opposed to flashing with open mesh. > > Or is there a secret to making the reset switch work? Not sure why UBNT > disables network access to redboot on the unit. That makes things really > really difficult to work with. > > Then when I try to change it, I get the configs not validating error. > > On 02/04/2011 02:51 PM, D. Ryan Spott wrote: >> It should not matter. IIRC when the device boots it is pre-<insert firmware >> here>. >> >> ryan >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >> Behalf Of Charles N Wyble >> Sent: Friday, February 04, 2011 2:17 PM >> To: wireless@wispa.org >> Subject: Re: [WISPA] Redboot help >> >> You did this from stock ubnt firmware? Or post openwrt flash? Or... >> >> >> >> On 02/04/2011 02:09 PM, D. Ryan Spott wrote: >>> The NS2s can be odd.. You have to pretty much keep booting them while >>> running the open-mesh-flash.exe app from a windoze machine. >> >>> I sometimes have to reboot the NS2 3 or 4 times to get it happy. >> >>> ryan >> >> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] >>> On Behalf Of Charles N Wyble >>> Sent: Friday, February 04, 2011 2:02 PM >>> To: WISPA General List >>> Subject: [WISPA] Redboot help >> >>> Anyone here successfully modified redboot configuration? On a >> nanostation2? >>> Turns out they don't have telnet on by default. I executed >> >>> fconfig -w -d /dev/mtd6 -n bootp_my_ip -x 192.168.1.1 >> >>> and now I get >> >>> Config verification failed >> >>> anytime I try to perform an operation on the red boot configuration. >> >>> Help! >> >>> I've got all 4 of my nanostations flashed with OpenWRT. Now I want to >>> flash them with the ROBIN mesh firmware. Or does anyone know how to >>> get a mesh operational on stock OpenWRT? I've tried for a few days and >>> can't get it working. ROBIN mesh seems like the way to go. >> >>> And of course I can't flash firmware from the OpenWRT web interface >>> cause it only accepts the .trx files. >> >>> Can anyone help? >> >>> Thanks! >> >> >> - >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> - >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> - >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> - >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > - > ---------------------------------------------------------------------------- > - ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > - > ---------------------------------------------------------------------------- > - ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > - > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > - > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > - -- > Charles N Wyble (char...@knownelement.com) > Systems craftsman for the stars > http://www.knownelement.com > Mobile: 626 539 4344 > Office: 310 929 8793 > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQIcBAEBAgAGBQJNTJJYAAoJEMvvG/TyLEAtAbgP/i31aYKceS2fcBb6KsggCuxx > 34+ognFHSpMpAbDIEeoeB0gR0U37fuNQ6VxiUnq7NeQtiF6ooShyTvhtK4ufET5D > XVecwkaijVwkotEHv0r87RQYEy2IiPzew0ViFjrZdPAv+sptrOwv8zsTP/9uNX/h > 1HBfR51xB46WIhgfU6jcm3ARr0EcLY1ipnTdKRo8ajgwNcFsHS2SNJPkDRiaN42A > IlKqEr0rciteeRBIwzTeA8PlTx7gzT4jydyR0tuSQnN3VAL8Kt1kqpSHaXyT/duZ > buDOg0p6lZrmU61jYvnAPuMyJcAMfkFY1j0SRw/3lQVxwQC5WAY8SLhdFm+GibgD > 9SBym000OJdd6QEkFHJ+CKIu7tqeQDAdhA35oWmYmbhQdPyARpilEy85Q7g9iMsE > 5aFfrg8nvdewGzBT6TwJK3hBJDZ0R/ZdKfw9IGIpdeP8xfe0vIGEaxCgqJ2k7Wzb > bQptbuZ6woMxZw52nE65R4q1PiCZ8Pnj+RoUI63thi4eCDpIkwpxGX4Fw5K1aGEQ > mwv8FTSL2h/76rZH3mM5ssb1mkT/71thu8z3XVmgoLy3iVlhmmWxplB+u3Uv0JTA > Xo+5xhY9tK4yZ761i+KYsj3yHACgtWllaXLdTXBU3vizWUDENkXoM6cgw7uXB8Au > oimZRyXVDL1HtoKWkx08 > =tiY9 > -----END PGP SIGNATURE----- > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
