did you double check that you use tap devices (as opposed to tun) (by ovpn, I assume you mean OpenVPN?)
Setting up OpenVPN was easy for me with this fine manual: http://openvpn.net/index.php/open-source/documentation/howto.html On Mar 12, 2011, at 11:59 PM, Scott Reed wrote: > I am missing something obvious. I need an ovpn tunnel that is a bridge > between 2 customer sites. I need it so a wire at location A can have an > address in the network at location B. I am missing something simple. > How would you set this up? > > -- > Scott Reed > Owner > NewWays Networking, LLC > Wireless Networking > Network Design, Installation and Administration > Mikrotik Advanced Certified > www.nwwnet.net > (765) 855-1060 > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
PGP.sig
Description: This is a digitally signed message part
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
