Hi, Would someone mind sharing their experience/suggestion on the proper float voltage for a 24V battery bank (2x 12V 44Ah AGM batteries)?
I'm using the MeanWell DRP-240-24 along with a DR-UPS40. It's not a three phase charger, but just limits the charging current to 2A. The voltage is adjustable at the source, and will ultimately determine my charge/float voltage. Based on my research, the highest voltage I should use is 13.8x2 = 27.6 to avoid boiling the batteries but still achieving a maximum charge. I was about to move on until I found another source suggesting that the ideal float voltage for telecom UPS batteries was 13.2x2 = 26.4. Thoughts? Thanks, -- Kristian Hoffmann System Administrator kh...@fire2wire.com http://www.fire2wire.com Office - 209-543-1800 | Fax - 209-545-1469 | Toll Free - 800-905-FIRE -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/