What version are you running on AP and CPE? What kind of range in signals (best is -40, worst is?)
Are you utilizing AirMax priorities on the CPE? On Wed, Jul 6, 2011 at 10:11 AM, Pat Nix <pni...@cnetworksolutions.com>wrote: > We are starting to notice an evident limitation with ubiquiti's polling > method. It seems that when we have more than about 15 or so subs on an AP > (M2) we start seeing extremely low upload from the sub (100-300mbps) even > when the sub has almost perfect signal -40db. AP are running 10Mhz wide > channel width and are running AirMax. Is anyone familiar with this issue > and is there some kind of workaround. We are looking at deploying some > M3.65 equipment but are leery if we are going to have the same problem. > Any > thoughts? > > Pat > CSWEB.NET > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/