We are working on deploying a pair of M5 dishes on our network bridging point a and point b. When we plug in the network to the dishes, the ping times climb to 1200+ms on side b of the bridge, and equipment local to the side b of the bridge, and time out after two or more hops, essentially bringing the whole network down. We can ping point to point with no traffic at 2ms. We are replacing a pair of existing bridges from another manuf. and not seeing this issue over these. Signal is -53dbm on both sides. -85 noise floor. Any ideas?
Patrick Nix, Jr., Computer Network Solutions CSWEB.NET Internet Services IT Manager http://www.cnetworksolutions.com http://www.csweb.net (918) 235-0414 ________________________________ Attention: This e-mail and any attachments may contain confidential and privileged information. If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail and destroy any copies. Any dissemination or use of this information by a person other than the intended recipient is unauthorized and may be illegal.
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/