Mine at max modulation is 51 if that helps. On Jul 25, 2011 11:48 PM, "Mike Hammett" <wispawirel...@ics-il.net> wrote: > Low 50s is about where you want to be for a link. Now the 40s is a bit much. > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > > On 7/25/2011 11:40 AM, Greg Ihnen wrote: >> Isn't -53 a little too hot? >> >> Are you using WDS? I don't know if AirMax has changed this but I know >> one used to need to run with WDS on for a purely transparent bridge. >> >> Greg >> >> On Jul 25, 2011, at 12:07 PM, Patrick D. Nix, Jr wrote: >> >>> We are working on deploying a pair of M5 dishes on our network >>> bridging point a and point b. When we plug in the network to the >>> dishes, the ping times climb to 1200+ms on side b of the bridge, and >>> equipment local to the side b of the bridge, and time out after two >>> or more hops, essentially bringing the whole network down. We can >>> ping point to point with no traffic at 2ms. We are replacing a pair >>> of existing bridges from another manuf. and not seeing this issue >>> over these. Signal is -53dbm on both sides. -85 noise floor. Any >>> ideas? >>> Patrick Nix, Jr., >>> Computer Network Solutions >>> CSWEB.NET <http://CSWEB.NET>Internet Services >>> IT Manager >>> http://www.cnetworksolutions.com >>> http://www.csweb.net >>> (918) 235-0414 >>> ------------------------------------------------------------------------ >>> Attention: This e-mail and any attachments may contain confidential >>> and privileged information. If you are not the intended recipient, >>> please notify the sender immediately by return e-mail, delete this >>> e-mail and destroy any copies. Any dissemination or use of this >>> information by a person other than the intended recipient is >>> unauthorized and may be illegal. >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List:wireless@wispa.org <mailto:wireless@wispa.org> >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives:http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/