Can you set it on an auto-ping?
Victoria Proffer <http://www.stlwimax.com/> STLWiMAX, LLC 314-974-5600 From: Brian Webster [mailto:bwebs...@wirelessmapping.com] Sent: Friday, March 16, 2012 9:02 AM To: victo...@stlbroadband.com; 'WISPA General List' Subject: RE: [WISPA] Preventing stupid outages The remote reboot power strip does nothing for you if the GFCI outlet or breaker has tripped, that needs to be reset unless it's an auto reset device. Thank You, Brian Webster www.wirelessmapping.com www.Broadband-Mapping.com From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Victoria Proffer Sent: Friday, March 16, 2012 9:40 AM To: 'WISPA General List' Subject: Re: [WISPA] Preventing stupid outages Is there a remote power strip that can be activated by a cell phone? i.e. strip ==== <cell phone > pstn > my computer Victoria Proffer STLWiMAX, LLC <http://www.stlwimax.com/> 314-974-5600 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Ryan Ghering Sent: Friday, March 16, 2012 8:20 AM To: WISPA General List Subject: Re: [WISPA] Preventing stupid outages We don't use them at towers, but I have here at home auto resetting GFCI outlets for my Saltwater reef tank. Got them from Home Depot.. They reset automatically after a few mins.. Ryan On Fri, Mar 16, 2012 at 7:08 AM, Matt Hoppes <mhop...@indigowireless.com> wrote: You have to have GFCI outlets indoors? I've never heard of that regulation before. A few thoughts come to mind: * Battery backup with 2 or so hours of run time along with a remote page for a power outage. Doesn't prevent you from having to dispatch but it keeps you from having an outage. * Re-check code? I don't understand why you need a GFCI outlet inside your shack. You don't have a sink or other water nearby. I don't have GFCI outlets in my office. Maybe I'm missing something here. If you are mounting an outdoor NEMA box with your equipment and just plugging into a GFCI then maybe you can figure out some way to get a hardwire into the box rather than plugging into an outside GFCI? On 3/16/12 9:04 AM, Troy Settle wrote: > Ok, so to keep to code, we have a GFCI outlet for most of our towers. > One of them tripped last night, causing me to have to put on some 80 > miles just to push a button (yes, it could have been much worse). > > Is there anything to prevent stupid outages like this from happening > without violating code? > > Thanks, > > -- > > Troy Settle, Network Administrator > > The Wired Road Authority > > 1117 E. Stuart Dr. > > Galax, VA 24333 > > (276) 238-0049 <tel:%28276%29%20238-0049> (office) > > (276) 237-3890 <tel:%28276%29%20237-3890> (cell) > > tset...@thewiredroad.net > > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- Ryan Ghering Network Operations - Plains.Net Office: 970-848-0475 - Cell: 970-630-1879
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
