Signal-engineering.com Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On May 8, 2012 2:18 AM, "Christopher Erickson" < christopher.k.erick...@gmail.com> wrote:
> I have a request from a customer that wants to run 12 MM duplex > fiber strands and 12 SM duplex fiber strands from the head > of a machine that articulates in two axes (at very low speeds) > to a control room. Yes, a big telescope for a professional > observatory on the summit of Mauna Kea. They also want the > fibers in Kevlar. Once I have confirmed the exact length needed > and other details, I am interested in having the cable(s) > custom-fabricated with prefab fan-outs on each end. They > haven't told me what connector types they wish to use so that's > still up in the air at the moment. > > I am not interested in trying to build cables at 14,000' or even > at sea level, for that matter. I have a quad-frequency OTDR but > I don't have all of the termination kits or tooling and don't > have interest in buying them for this one-off project. > > Anyone here have a favorite (and affordable) custom-fiber-cable > fabricator that they would recommend? > > Anyone here interested in making some custom fiber-optic cables? > > Thanks for reading! > > Christopher Erickson > Consulting Engineer > Summit Kinetics > Waikoloa, HI 96738 > www.summitkinetics.com > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless >
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless