Are you loosing connectivity to the client radios or only loosing data from 
them?

What do your link stats show?  Signal quality etc.

What are your eirp levels at normally and during the events?

  ----- Original Message ----- 
  From: Tom Sharples 
  To: Wireless@wispa.org 
  Sent: Wednesday, October 31, 2012 1:46 PM
  Subject: [WISPA] CM9 Rx blocking problem?


  Hello all,

  We're seeing an odd problem at a customer location in Honolulu. About a year 
ago, we set up a pretty conventional point-to-multipoint 5.8 Ghz setup for 
video surveillance - a dual-radio gateway node attached to a pair of sector 
antennas, and 4 client radios (2 on each sector) attached to IP cams. The 
client radios are between 1/4 to 1/2 mile away from the gateway node. This is a 
multi-building industrial project in a fairly heavily polluted (RF wise) area. 
There's a Home Depot and Lowes nearby with equipment on all 5.8 Ghz channels. 
However our radios scan well above the noise floor.

  Our equipment uses pcengines alix boards running our own linux-based OS and 
CM9's using standard madwifi-style drivers. Same thing we've been using for 
years.

  This installation worked well at first. However, we are now seeing a 
situation in which both gateway radios suddenly stop receiving data from the 
downstream clients. This lasts from 5 to 20 minutes or so and then magically 
fixes itself. When I ssh in during the problem, there'e no indication of 
low-level driver problems or crashes, everything looks normal except for the 
sudden lack of data and connectivity with the client devices. 

  This installation is near Pearl Harbor and there are constant overflights 
from military aircraft. I'm wondering if this is a sensitivity issue to e.g. 
radar or some other high-powered signals from these planes. I've seen things 
like this before but never lasting up to 20 minutes. Would we see an 
improvement by switching to XR5's? We don't normally use those on short hauls 
like but they have better OOB filters than the CM9's. Thoughts?

  Thanks,

  Tom S.



------------------------------------------------------------------------------


  _______________________________________________
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to