Of course they are black now. But they were white when they were white.
And black (allegedly UV resistant) ties are used outdoors a lot, for many things. Bet you even have some on your tower. And yes, we use hose clamps. The tie is a pointless inclusion in the packaging. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, April 16, 2013 6:58 PM To: WISPA General List Subject: Re: [WISPA] Waterproofing the NanoBridge First off they're black now. Have been for some time. Secondly, who uses zip ties outdoors?! I have a radio on the roof pointing home. I just went up there today to look at our stuff and saw it had rotated 90 off. Using two of those zip ties. Turns out it happened around Christmas, but today I hose clamped it as it should be. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Apr 16, 2013 6:51 PM, "ralph" <ralphli...@bsrg.org <mailto:ralphli...@bsrg.org> > wrote: Oops, I typed all this up before I read the OP again and saw it was about NanoBridges and not NanoStations. But I was proud of it, so I'm sending it anyway. lol The first step in waterproofing the NanoStation is: NEVER, NEVER, EVER, EVER use that stupid white wire tie they come with to mount it! The foil tape holding it folded is worth more that the wire tie itself. Come to think of it, I should have gotten a roll of the foil tape and used it for mounting. If you use the white one, you will be back in 3 years and the Nano will be hanging upside down by its wire, filled with water. From: wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> ] On Behalf Of Josh Luthman Sent: Tuesday, April 16, 2013 1:15 PM To: WISPA General List Subject: Re: [WISPA] Waterproofing the NanoBridge I know we've seen it with our limited Picos and Nanobridges. The sticker covering the LED hole lets water in =( Josh Luthman Office: 937-552-2340 <tel:937-552-2340> Direct: 937-552-2343 <tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 16, 2013 at 1:09 PM, Matt Hoppes <mhop...@indigowireless.com <mailto:mhop...@indigowireless.com> > wrote: Say what? NanoBridges are pretty much an all-in-one piece of plastic... shouldn't be anything to water proof. Matt Hoppes Director of Information Technology Indigo Wireless +1 (570) 723-7312 <tel:%2B1%20%28570%29%20723-7312> On 4/16/13 1:08 PM, ~NGL~ wrote: > Because of the problems I have had with the Bullets, I wonder if there > is any thing I should do to waterproof the NB's? > Thanx > NGL > If you can read this Thank A Teacher. > And if it's in English Thank A Soldier! > > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org <mailto:Wireless@wispa.org> > http://lists.wispa.org/mailman/listinfo/wireless > _______________________________________________ Wireless mailing list Wireless@wispa.org <mailto:Wireless@wispa.org> http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list Wireless@wispa.org <mailto:Wireless@wispa.org> http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless