If you mean to have Ubnt below it <10' on the same frequency with the same bearing, you're going to ruin any customers on that AP.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Aug 8, 2013 at 8:00 PM, ~NGL~ <n...@ngl.net> wrote: > ** > > Every thing is a duplicate link side by side. > NGL > > *From:* Josh Luthman <j...@imaginenetworksllc.com> > > *Sent:* Thursday, August 08, 2013 4:52 PM > *To:* WISPA General List <wireless@wispa.org> > *Subject:* Re: [WISPA] 5.8 Separation > > Get as much as possible. Are they pointing the same direction or away? > If they're different frequencies, I would be comfortable with 5 feet. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Thu, Aug 8, 2013 at 7:50 PM, ~NGL~ <n...@ngl.net> wrote: > >> ** >> 10 foot is hard to get on a 65 foot tower, what is the minimum I can get >> away with? >> Thanx >> NGL >> >> *From:* Josh Luthman <j...@imaginenetworksllc.com> >> *Sent:* Thursday, August 08, 2013 4:46 PM >> *To:* WISPA General List <wireless@wispa.org> >> *Subject:* Re: [WISPA] 5.8 Separation >> >> If the Tranzeo AP is at 5725 in 20 MHz you'll want to be 5745 (or >> farther, which is better) on the Ubnt. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> On Thu, Aug 8, 2013 at 7:42 PM, ~NGL~ <n...@ngl.net> wrote: >> >>> ** >>> What do you mean by spectrum separation? >>> NGL >>> >>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>> *Sent:* Thursday, August 08, 2013 4:38 PM >>> *To:* WISPA General List <wireless@wispa.org> >>> *Subject:* Re: [WISPA] 5.8 Separation >>> >>> Ideally 10 feet vertically. Assuming you have spectrum separation, too. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> On Thu, Aug 8, 2013 at 7:37 PM, ~NGL~ <n...@ngl.net> wrote: >>> >>>> ** >>>> We have the following setup: >>>> Tower 1 = Tranzeo TR-5 plus AP >>>> Tower 2 = Tranzeo TR-5 plus CPE + TR-5 plus AP >>>> Tower 3 = Tranzeo TR-5 plus CPE >>>> These have worked fine for several years, now we want to add >>>> a duplicate link using Nanobridges 5.8 instead of the Tranzeo TR-5 Plus >>>> gear. >>>> >>>> How much physical separation should we plan on between the Tranzeo >>>> units and the Nanobridges? >>>> >>>> Thanx >>>> NGL >>>> >>>> >>>> If you can read this Thank A Teacher. >>>> And if it's in English Thank A Soldier! >>>> >>>> _______________________________________________ >>>> Wireless mailing list >>>> Wireless@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>> ------------------------------ >>> >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@wispa.org >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@wispa.org >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >> ------------------------------ >> >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> > ------------------------------ > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
<<inline: flag.gif>>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless