Be-careful for what you ask for... Gino has to do his calc, by setting the noise floor to -72
We are fast approaching something similar in downtown Miami.. :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] ----- Original Message ----- > From: "Jaime Fink" <[email protected]> > To: "WISPA General List" <[email protected]> > Sent: Sunday, August 10, 2014 7:49:28 PM > Subject: Re: [WISPA] Mimosa Calcs and Noise? > Hi Gino, > First, thanks for using the Design tool! Sorry for the delay in response, one > of my colleagues appears to be caught in the WISPA members list first time > use jail syndrome ;) > The noise floor row in the link budget is not set statically to –95 dBm. It > is actually calculated based on average temperature at the location, the > selected bandwidth, and the receiver noise figure. This is the Thermal Noise > Floor for the receiver to give it a more accurate description. > The intent with the Interference Loss value was to allow users the ability to > define additional noise above the thermal noise floor. > What we are discussing internally and would welcome the rest of the group to > weigh in on, is to rename “Interference Loss” to “Noise Floor Override” and > replace the calculated (Thermal) Noise Floor with the override value if it > is greater. This would allow a higher value to be specified where you know > there is a higher noise floor present where the radio will be deployed. > Please keep the comments and suggestions coming, we have tons of work going > on in this tool to keep adding and improving constantly. > There is a direct feedback form on the Design tool on the bottom left hand > corner, that is the quickest way to get straight to our Engineers and make > sure we don’t miss anything. > Cheers! > Jaime Fink • Mimosa • Chief Product Officer > 300 Orchard City Dr Ste 100 • Campbell • CA 95008 • www.mimosa.co > This email may contain confidential and privileged material for the sole use > of the intended recipient(s). Any review, use, distribution or disclosure by > others is strictly prohibited. If you are not the intended recipient (or > authorized to receive for the recipient), please contact the sender by reply > email and delete all copies of this message. > On Aug 7, 2014, at 6:01 AM, Gino Villarini < [email protected] > wrote: > > Where do adjust the noise figure for real capacity measurements? Noise > > loss? > > Whats that? > > > Gino A. Villarini > > > President > > > Aeronet Wireless Broadband Corp. > > > www.aeronetpr.com > > > @aeronetpr > > > _______________________________________________ > > > Wireless mailing list > > > [email protected] > > > http://lists.wispa.org/mailman/listinfo/wireless > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
