Brandon from Ubiquiti here. We've seen a slew of installs w/ hotels and w/ the low power of the UAP-IW performance seems fine. Keep in mind for sure that the best throughput you can expect out of these is ~20-30mbps.
These are intended for situations where they'd be installed in each hotel room (they're low Tx power) and for for lower-throughput needs. I'd recommend these for installs where single-customer throughput is 5mbps or less. The comments about 2.4GHz-only installs are spot on. The low Tx power of the UAP-IW helps a lot here, as the cells are small, and little signal gets outside of a given room, but performance will of course be well below a dual-band model. As above, for installs where ~5mbps is what customer will need (on average), I think these will be OK. For higher throughput we also have a UAP-AC-IW coming out late this year. These will be good for ~250mbps per user. Cheers, Brandon On Wed, Sep 7, 2016 at 4:36 PM, Matthew Carpenter < [email protected]> wrote: > Any experience with the > Ubiquiti Networks UAP-IW-US > UniFi AP In-Wall 2.4GHz US > > Looking at a deployment of these in a Hotel. > > Thanks! > > -- > *Matthew Carpenter* > *806-316-5071 <806-316-5071> office* > *806-236-9558 <806-236-9558> cell* > > > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
