It's such a shame that they didn't just make a connectorized twist-port. That severely limits the platforms.
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Chadwick Wachs" <c...@auwireless.net> To: "WISPA General List" <wireless@wispa.org> Sent: Monday, March 6, 2017 2:44:37 PM Subject: Re: [WISPA] epmp 1000 in noisy environment Carrier Class horn - uses pigtails (not a twist port). On Mar 6, 2017, 1:26 PM -0700, David Jones <d...@nglconnection.com>, wrote: Chad. what did you have to do to get the ePMP 2000 into a horn? do they have the adaptors for it yet? On Mon, Mar 6, 2017 at 11:02 AM, Chadwick Wachs < c...@auwireless.net > wrote: <blockquote> Tha antenna that Cambium sells to go with the ePMP 2000 is a 90/120 degree sector. The main sector is 120 degrees and you can add on a 90 degree “smart” antenna. We have one deployed with the 120 degree sector and the other 2000 AP uses a 60 degree horn. SNR is much better on the 60 degree horn but we keep the 120 up as a fail over antenna for our other APs - otherwise it would get changed out to a 60 as well. On Mar 6, 2017, 11:01 AM -0700, Josh Luthman < j...@imaginenetworksllc.com >, wrote: <blockquote> If you're in a noisy area spend the extra bucks to get the uplink improvements of the epmp 2000. It'd be a big mistake to not. I don't believe they do epmp2000 in 120*, so while your point is valid, I don't think this mistake can be made =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Mar 6, 2017 at 12:51 PM, Chadwick Wachs < c...@auwireless.net > wrote: <blockquote> 2000 performs better than 1000. We have both deployed on a noisy tower and the 2000 has better performance - but the 1000 is working. Get your antenna width as small as possible. A 120 degree sector is not your friend in a noisy environment. We are using 60 degree horns and that has really helped with the noise as well since the radio can’t hear as much. On Mar 6, 2017, 10:46 AM -0700, Marco Coelho < coelh...@gmail.com >, wrote: <blockquote> I was checking to see if anyone has some epmp 1000 experience in noisy environments. What have your experiences been? -- Marco C. Coelho Argon Technologies Inc. POB 875 Greenville, TX 75403-0875 903-455-5036 _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless </blockquote> _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless </blockquote> _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless </blockquote> -- David Jones NGL Connection 307-288-5491 ext 702 _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless </blockquote> _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless