Conjecture/Intuition: I don't have a ptp-450 to test with, but my guess is it's the same MIB as the pmp-450. This page points at the PMP45x MIBs:
https://support.cambiumnetworks.com/files/ptp450/ That being the case, it might treat the slave as a single LUID. Try .1.3.6.1.4.1.161.19.3.1.4.1.35.0 (lastPowerLevel). In pmp-450 land, 1.3.6.1.4.1.161.19.3.1.4.1.35 is the walkable OID for LUIDs, with the first (and in the case of ptp-450, only) LUID being .0. Unfortunately, you can only get one side of the RX story with PMP450 (and likely PTP450), so you will probably need to monitor both hosts with that above OID. You might also consider monitoring frame utilization: 1.3.6.1.4.1.161.19.3.1.12.1.2.0 (frUtlLowTotalUplinkUtilization) 1.3.6.1.4.1.161.19.3.1.12.1.1.0 frUtlLowTotalDownlinkUtilization) --dan From: [email protected] [mailto:[email protected]] On Behalf Of Gino Villarini Sent: Sunday, March 19, 2017 7:43 AM To: WISPA General List <[email protected]> Subject: [WISPA] PTP450 Rx level SNMP? Anyone has the OID for the RX level on BH Master? Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:[email protected]]
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
