Unless you have your own EPC. In which case you don't use the LGW. IPs are then assigned by the EPC and you should be able to assign a Static IP and route a subnet to it just fine.
Best Wishes, Jayson A. Baker Peak Internet Sent from my iPhone On Jul 5, 2017, at 6:18 AM, Josh Luthman via WISP <[email protected]> wrote: I think bridging is in beta. Right now officially it's NAT only. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 5, 2017 1:36 AM, "mike.lyon--- via WISP" <[email protected]> wrote: > When deploying a Baicells eNb and Baicells CPE, is it possible to route a > subnet to a specific CPE without it getting NAT'd at the CPE or eNb? > > Thanks in advance. > > -Mike > _______________________________________________ > WISP mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wisp > _______________________________________________ WISP mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wisp -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
