https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=16508
Bug ID: 16508
Summary: filter "-f host X.X.X.X" does not work in case of Q in
Q
Product: Wireshark
Version: unspecified
Hardware: x86-64
OS: Debian
Status: UNCONFIRMED
Severity: Major
Priority: Low
Component: TShark
Assignee: bugzilla-ad...@wireshark.org
Reporter: karol.sko...@gmail.com
Target Milestone: ---
Created attachment 17731
--> https://bugs.wireshark.org/bugzilla/attachment.cgi?id=17731&action=edit
packets with QinQ that does not tshark capture using host IP filter
Build Information:
TShark (Wireshark) 3.2.3 (Git v3.2.3 packaged as 3.2.3-1)
--
When using QinQ (two VLANs) in packets, tshark does not capture traffic with IP
filter.
When QinQ is disablen (one on none VLAN is available), IP filter works fine.
Complete command used:
tshark -i eth3 -w /home/user/test.pcapng -f "host 172.31.250.103"
Adding packets with 2 VLANs which were not captured by IP filter, but using no
filter.
Thank you.
Karol
--
You are receiving this mail because:
You are watching all bug changes.___________________________________________________________________________
Sent via: Wireshark-bugs mailing list <wireshark-bugs@wireshark.org>
Archives: https://www.wireshark.org/lists/wireshark-bugs
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-bugs
mailto:wireshark-bugs-requ...@wireshark.org?subject=unsubscribe
