Netfortius wrote: > On a MacOSX, using the latest (0.99.3a) version of wireshark, I am attempting > to run in one terminal a: > > $sudo tcpreplay -i lo0 capture-file.cap (or even -R to speed up the process) > > while in a wireshark *session* reading out of the same lo0 (local interface > on > a MacOSX), but I am getting for all traffic IP header length = 0 (should be > at least 20), thus nothing interpreted. > > The capture-file.cap was previously obtained via a wireshark capture session > of a real TCP session, produced with *against* a real network interface (en0 > in the case of this specific MacOSX system I am working with).
Does tcpreplay support reading from a capture file on an Ethernet interface (with a link-layer type of DLT_EN10MB) and sending it on a BSD loopback interface (with a link-layer type of DLT_NULL)? If not, that's the problem. _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users