It looks like the dBm tag isn't supported in Wireshark. Do you have a capture file you can send to the list or upload to the wiki?
Avi Berkovich wrote: > First, thanks for the link. > > As for the dBm value, it is present in the capture file (stored right > after the percentage value in the packet header). > > > > > Date: Tue, 22 Jan 2008 09:34:55 -0800 > > From: [EMAIL PROTECTED] > > To: wireshark-users@wireshark.org > > Subject: Re: [Wireshark-users] WLAN APC file and RSSI > > > > Avi Berkovich wrote: > > > Hello, > > > > > > Wireshark doesn't display the RSSI value in dBm, only in percent. > > > This happens with APC files captured with Airopeek. > > > > > > Is this a limitation? > > > > Are you sure the dBm values are present in the capture file? > According to > > > http://www.wildpackets.com/elements/whitepapers/Converting_Signal_Strength.pdf, > > > > WildPackets prefers to use percentage values. > > _______________________________________________ > > Wireshark-users mailing list > > Wireshark-users@wireshark.org > > http://www.wireshark.org/mailman/listinfo/wireshark-users > > ------------------------------------------------------------------------ > Express yourself instantly with MSN Messenger! MSN Messenger > <http://clk.atdmt.com/AVE/go/onm00200471ave/direct/01/> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Wireshark-users mailing list > Wireshark-users@wireshark.org > http://www.wireshark.org/mailman/listinfo/wireshark-users _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
