Re: Witango-Talk: Problem assigning Array values in local and user scope

[John McGowan]

If it wasn't a typo, and your server wasn't setup to properly use 
applications then perhaps the user variables weren't working right....  
Someone who uses the applications feature of witango could answer this 
better, we don't use them here.

/John

Mike Scally wrote:

Thanks Alan, Yep, it looks like the configuration is the problem. I
setup a new instance of a Tango Server with their configuration files on
my machine and it didn't work. I compared everything and one thing that
seemed to make the difference was the value of the USERKEY configuration
variable. On My development box it was set to USERKEY=<@USERREFERENCE>
and theres was set to USERKEY=<@APPKEY<@USERREFERENCE>. When I took out
the <@APPKEY> part from theirs it seemed to work fine. 

After reading the configuration variables I am still slightly confused
as to why this made the difference - any ideas why this would be so?
-----Original Message-----
From: Alan Wolfe [mailto:[EMAIL PROTECTED] 
Sent: 13 May 2004 18:12
To: [EMAIL PROTECTED]
Subject: Re: Witango-Talk: Problem assigning Array values in local and
user scope

hmmm

since it works on your dev system but not production system, have you
compared your ini files to see if there's any difference?
----- Original Message ----- 
From: "Mike Scally" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 13, 2004 9:54 AM
Subject: RE: Witango-Talk: Problem assigning Array values in local and
user scope

No caching I stuck in a bit of text and that came up no problem ...
Thanks for the suggestion though at this stage any suggestions are much
appreciated
-----Original Message-----
From: Alan Wolfe [mailto:[EMAIL PROTECTED]
Sent: 13 May 2004 17:57
To: [EMAIL PROTECTED]
Subject: Re: Witango-Talk: Problem assigning Array values in local and
user scope
Hey Mike,

Do you have cacheing on, could it be that your old taf that doesn't work
is still in the cache so your new code isnt running?
you might try putting some new text in there and seeing if it comes up
just in case.
----- Original Message ----- 
From: "Mike Scally" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 13, 2004 9:41 AM
Subject: RE: Witango-Talk: Problem assigning Array values in local and
user scope

Nope, tried it and purge in or out doesn't make a difference it still
fails...
-----Original Message-----
From: John McGowan [mailto:[EMAIL PROTECTED]
Sent: 13 May 2004 17:20
To: [EMAIL PROTECTED]
Subject: Re: Witango-Talk: Problem assigning Array values in local and
user scope
I assume that if you take the purge out of there it works ok...

/John

Mike Scally wrote:

 

John,

Its 4.05.020 ... The strange thing is both Development box and 
Deployment Box are up to the same version 4.05.020

Cheers
Mike.
-----Original Message-----
From: John McGowan [mailto:[EMAIL PROTECTED]
Sent: 13 May 2004 17:01
To: [EMAIL PROTECTED]
Subject: Re: Witango-Talk: Problem assigning Array values in local and 
user scope

Mike,

What specific version of Tango2000 are you running?

Hint: Use the <@version> tag to find out...

/John

Mike Scally wrote:



   

Hi,

I am having a problem assigning arrays. I cannot figure out the issue 
but I have simplified the problem down to reproduce the error and the 
following 4 lines suffice. I assign an array in local scope, then 
assign this to a user variable. I purge the local variable but if I 
re-assign back to a local variable the new local variable is empty.

Lines of code as follows :

<@ASSIGN NAME="myArray" VALUE="<@ARRAY ROWS='1' COLS='1' 
VALUE='12234'>" SCOPE="local"> <@ASSIGN NAME="myArrayUser" 
VALUE="<@VAR local$myArray>" SCOPE="user"> <@PURGE NAME="myArray" >>SCOPE="local"> <@ASSIGN NAME="myArrayLocal" SCOPE="local" VALUE="<@VAR
     

 

user$myArrayUser>"> New Local Array : <@VAR local$myArrayLocal>

The user$myArrayUser variable contains 1 row as expected but the 
local$myArrayLocal is empty and never gets assigned the value of 
user$myArrayUser. This works on my development server but when 
deployed on the same version of Tango Server it fails. If anyone had 
any ideas at all they would be much appreciated. Could it be some kind

     

   

of Tango Configuration issue?

Setup :
Windows 2000
Tango2000
Thanks
Mike.


********************************************************************
This message is intended only for the use of the person(s) ("the 
intended
recipient(s)") to whom it is addressed. It may contain information 
which is privileged and confidential within the meaning of applicable 
law. If

     

you

   

are not the intended recipient, please contact the sender as soon as 
possible. The views expressed in this communication may not

     

necessarily

   

be the views held by LGCSB (Local Government Computer Services Board).

Any attachments have been checked by a virus scanner and appear to be 
clean. Please ensure that you also scan all messages, as LGCSB does 
not accept any liability for contamination or damage to your systems.
********************************************************************

______________________________________________________________________
_
_
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf


     

_______________________________________________________________________
_
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
********************************************************************
This message is intended only for the use of the person(s) ("the 
intended
recipient(s)") to whom it is addressed. It may contain information
   

which is
 

privileged and confidential within the meaning of applicable law. If
   

you
 

are not the intended recipient, please contact the sender as soon as 
possible. The views expressed in this communication may not necessarily
   

 

be the views held by LGCSB (Local Government Computer Services Board).

Any attachments  have been checked by a virus scanner and appear to be 
clean. Please ensure that you also scan all messages, as LGCSB does not
   

 

accept any liability for contamination or damage to your systems.
********************************************************************
_______________________________________________________________________
_
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf


   

________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
********************************************************************
This message is intended only for the use of the person(s) ("the
intended
recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication may not necessarily
be the views held by LGCSB (Local Government Computer Services Board).
Any attachments  have been checked by a virus scanner and appear to be
clean. Please ensure that you also scan all messages, as LGCSB does not
accept any liability for contamination or damage to your systems.
********************************************************************
________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
********************************************************************
This message is intended only for the use of the person(s) ("the
intended
recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication may not necessarily
be the views held by LGCSB (Local Government Computer Services Board).
Any attachments  have been checked by a virus scanner and appear to be
clean. Please ensure that you also scan all messages, as LGCSB does not
accept any liability for contamination or damage to your systems.
********************************************************************
________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
********************************************************************
This message is intended only for the use of the person(s) ("the intended
recipient(s)") to whom it is addressed. It may contain information which is
privileged and confidential within the meaning of applicable law. If you 
are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication may not necessarily
be the views held by LGCSB (Local Government Computer Services Board).

Any attachments  have been checked by a virus scanner and appear to be 
clean.
Please ensure that you also scan all messages, as LGCSB does not accept
any liability for contamination or damage to your systems.
********************************************************************

________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf
 

________________________________________________________________________
TO UNSUBSCRIBE: Go to http://www.witango.com/developer/maillist.taf