Thanks Greg,
I’m trying to do this to avoid dragging my laptop out for 10 Ghz roving – so
the band won’t be busy! I can always try over clocking to 1 Ghz and see what
difference that makes.
Right now I’ve got past the PIL problem by installing PILLOW instead – then I
ran into an error:
FATAL: cannot locate cpu Mhz in /proc/cpuinfo
Sigh… this is endless.
Stu K6TU
From: ki7mt <ki...@yahoo.com<mailto:ki...@yahoo.com>>
Reply-To: WSJT software development
<wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>>
Date: Friday, August 29, 2014 at 1:29 PM
To: "wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>"
<wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>>
Subject: Re: [wsjt-devel] wsjt or wsjt-x for Raspian on Pi?
Hi Stu
We just had a discussion on this regarding WSPR, which uses most all of the
same packages that WSJT needs. Fred (WA1DLZ) posted his findings regarding the
requirements for Wheezy and Jessie (Raspian). The main issue (I think) is that
python3-pil is missing from Wheezy, but is present in Jessie.
Link: https://groups.yahoo.com/neo/groups/WSJTgroup/conversations/messages/13134
You will still need to resolve the Audio setup as well as the WSJT.INI
settings. System resources may also be an issue, as the Rpi is has a much lower
powered CPU (Arm6 I believe it is) than a standard x86 CPU, but in theory, it
should be possible. I would think decoding would be slower on a busy band. You
may also want to look at Arm6 specific compiler flags.
Needless to say, using WSJT on an Rpi is not optimum, and will require a good
bit of special configuring, but it should be possible. How well it performs is
another matter entirely.
73's
Greg, KI7MT
On 08/29/2014 12:41 PM, Stuart Phillips wrote:
Sorry for this dumb question but I’m banging my head against the wall trying to
run wsjt for Rapsian on a Pi.
I pulled the top of trunk and built ok but when running, I get “No module named
PIL” - but PIL is installed and apparently now under Python3, its should be
import Image (but that doesn’t work either!).
So, can someone point me to a branch of Trunk that will build and run under
Linux or, should I be trying to build Wsjt-x instead?
Thanks!
Stu K6TU
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
