On 12/09/2014 00:04, Bill Somerville wrote: > On 11/09/2014 23:57, KI7MT wrote: >> Hi Bill, > Hi Greg, >> Yup, I think that's the issue. I've never been able to build Hamlib3 on >> Windows, only on Linux. My current version was from one of your DropBox >> Downloads I believe. >> >> I can Zip up my version and update the sdk in just a few minutes, unless >> you have a newer version you want mt to add? > Oh! So the JTSDK doesn't have a MinGQ Hamlib-3 libhamlib.a in it. That's > not good. > > Sounds like I need to publish a recipe to build the WIndows MinGW > Hamlib-3 from my fork. I thought I had done that in the past. I'll have > a search through the archives and see if I can find it. Here is the original thread where I introduced the change from dynamic linking to static linking Hamlib-3 from my fork.
https://sourceforge.net/p/wsjt/mailman/message/32576350/ There should be enough info in there to set up a MinGW Hamlib-3 build using an Msys console. Otherwise the link in there to my Dropbox binaries is still valid and probably the one you are using Greg. > > My current build has code in that could potentially turn some Yaesu rigs > into paperweights so I think for now your install is best. >> 73's >> Greg, KI7MT > 73 > Bill > G4WJS. 73 Bill G4WJS. ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
