On 01/10/2014 16:05, Joe Taylor wrote: > Bill -- Hi Joe, > > Yes, TS-2000. I can use either a Debug or Release configuration -- let > me know which would be useful. I probably won't get to doing further > tests until this evening. OK in a Debug configured build tree set the following CMake options (e.g. using cmake-gui or edit CMakeCache.txt):
WSJT_QDEBUG_TO_FILE=ON WSJT_TRACE_CAT=ON WSJT_HAMLIB_TRACE=ON If you want to use a Release configured build then you would need to also set: WSJT_QDEBUG_IN_RELEASE=ON If you have and old wsjtx_trace.log in the install bin folder, delete it. Rebuild, install, run test to demonstrate behaviour and, close application. Send wsjtx_trace.log (in the install bin folder) to me for analysis. > -- Joe 73 Bill G4WJS. > > On 10/1/2014 10:59 AM, Bill Somerville wrote: >> On 01/10/2014 15:56, Joe Taylor wrote: >>> Hi Bill, >> Hi Joe, >>> I'm using the hamlib interface. >> OK, that shouldn't happen. I assume that is with a TS-2000. I need to >> see a trace from that to see exactly what is happening. Do you normally >> test with a Debug or Release configuration build? >>> -- Joe >> 73 >> Bill >> G4WJS. >>> On 10/1/2014 10:24 AM, Bill Somerville wrote: >>>> On 01/10/2014 15:22, Joe Taylor wrote: >>>> Hi Joe, >>>>> I have noticed that when operating in Split mode, double-clicking on a >>>>> line of decoded text causes a momentary change of VFO A frequency, >>>>> whenever the final result will also change the frequency of VFO B. >>>>> >>>>> Yes, at the end VFO A is reset back where it should be; but why is it >>>>> changed, at all? Is this necessary? It causes a brief gap in received >>>>> audio, presumably degrading (slightly) the chances for successful decodes. >>>> Are you using the hamlib interface or one of the network ones? >>>>> -- Joe, K1JT >>>> 73 >>>> Bill >>>> G4WJS. >>>> >>>> ------------------------------------------------------------------------------ >>>> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer >>>> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports >>>> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper >>>> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer >>>> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk >>>> _______________________________________________ >>>> wsjt-devel mailing list >>>> wsjt-devel@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> ------------------------------------------------------------------------------ >>> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer >>> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports >>> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper >>> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer >>> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> ------------------------------------------------------------------------------ >> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer >> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports >> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper >> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer >> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel