Hi Eddy,
Thanks for your report. I'm not aware of any problems with v1.4 talking
to an FT-847, but we'll look into it and will be in touch if we need
more information.
-- Joe, K1JT
On 10/1/2014 2:26 PM, Edward Payne wrote:
> Hi Joe,
>
> I would like to firstly say that your software has been instrumental in
> getting me back into amateur radio after many years and has given me many
> hours of fun and for that you and your team must be congratulated.
>
> Unfortunately I'm having a problem with the latest version 1.4.0-rc2. It
> flatly refuses to connect to my FT-847. After inputting all the same settings
> as V 1.3 r3673, when I press the Test Cat button it comes up with: Rig
> Failure - Hamlib: unable to initialise rig.
>
> My set up is as follows:
>
> Computer to rig is via a Keyspan USA-19HS usb to serial adaptor. Which works
> perfectly with V 1.3. On the computer the port Com 3 is set to serial rate
> 9600, handshake = none, data bits = 8, stop bits = 2 which is mirrored in
> your software. I use a SignaLink usb for the audio.
>
> If I choose to initially connect to my rig by either DX Labs Commander or Ham
> Radio Deluxe, V 1.4.0-rc2 works perfectly to control the rig frequency.
>
> I have read through the online manual and I cannot find anything I've done
> wrong in setting up the software.
>
> Please can you or one of your team help me?
>
> Regards,
>
> Eddy - G6UQI
>
>
>
>
> Eddy Payne
> Chairman
> Bromyard Bowmen
> www.bromyardbowmen.org
> Tel: 01568 611945
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
