On 10/21/2014 10:02 PM, Joe Taylor wrote: Hi Rusty,
>> Using version 1.4.0-rc2 r4400, I cannot seem to get the radio to respond >> to transmit. I have checked, double checked, and triple checked my >> settings to make sure everything matched and nothing. Had a friend of >> mine who works in the IT industry as a troubleshooter remote to my >> computer and he could not get it to work. 2 other friends of mine came >> over that are electrical engineers and it left both of them scratching >> their heads. There is a lot of people involved, but you do not write what exactly you have tested and verified. Because I suspect at first that there is probably a communication problem between hamlib and your rig, I suggest that you should examine first if this communication is working well, using the program "rigctl" from the hamlib package. Because I never had the opportunity to work with an IC-9100, the following command is just the basic idea for the command you could enter at your computer: /usr/local/bin/rigctl -m368 --send-cmd-term="" --set-conf=rig_pathname=/dev/ttyUSB0, serial_speed=19200,dcd_type=RIG,timeout=50,retry=2,write_delay=20, post_write_delay=50,itu_region=2 Please verify if these arguments really apply at your site. At first, test using the same values as found in your wsjtx config. Enter some commands in rigctl an verify if they are working well. If the values in your wsjtx config are different, please have a try with the values I have given here. Good luck ! Best 88 de Claude (DJ0OT) ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
