On 26/02/2015 02:35, David Bowman wrote: Hi David,
> I'm receiving "hamlib: Invalid configuration while opening connection > to rig". I had regular crashes with v 1.3 r 3673 but made many > contacts. My setup is: > > Kenwood TS-2000 > poll int = 2 sec > Com3 for Cat > rate 38400 > data bits 8 > stop bits one > force control lines = rts > ptt method = rts com5 > transmit audio source = front/pkt > mode = data/pkt > split operation = none > TEST CAT color is red > TEST PTT is grayed out. That is a known defect that has been repaired for later releases. Unless you have a CAT interface that draws power from the RS-232 line RTS, your configuration is not correct, if you un-check "Force Control Lines" "RTS" and check "Handshake" "Hardware" you should be able to connect to your rig. 73 Bill G4WJS. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
