Sounds like you might have permission problems. What you describe SHOULD change. If you can hear the signals they should decode...again it could be permission problems.
Do you have admin rights on your login? Did you install the software with admin rights? Turn on Save/Save All. Wait for at least one cycle to finish. Then look at %USERPROFILE%\AppData\Local\WSJT-X\save You should have a WAV files in there with times that match what you just did. If you see one that you think should have decoded send it to the list and we'll check it for you. Mike W9MDB -----Original Message----- From: Guy G4DWV/4X1LT [mailto:[email protected]] Sent: Tuesday, March 24, 2015 5:01 PM To: [email protected] Subject: [wsjt-devel] wsjt-x 1.4.0 RC4 - RF gain slider I understand that the RF gain slider is supposed to modify the 'InGain' parameter in wsjt-x.ini. It does not seem to here. Steps taken - Check ini file, close it. Open wsjt-x, move slider, close it and then check ini file again - no change. Do same again, same result. I an hearing JT65 signals that do not decode. They are not weak, but again not super strong. I was getting tips from a fellow ham and he suggested setting the RF gain mid way which should get an InGain value of 0. Have I been misinformed or is this unexpected behaviour? Mni tnx, 73 Guy G4DWV/4X1LT ---------------------------------------------------------------------------- -- Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
