Ran a test now with WSJT-X.ini removed prior to invoking the program.... still not transmitting after 4 RX cycles and TX Pct = 50%
Configuration should be rather standard. Only set the callsign and grid, rest is default per having removed WSJT-X.ini: Call: WG2XJM (Part 5 exp call) Grid: EN91 Band: 630M Mode: WSPR-2 Tx Pct = 50% (even 100% was not triggering TX) Enable TX = true (GUI button highlighted Red) Tx = 1500 Hz Band Hopping = false Program info: Relative URL: ^/branches/wsjtx Revision: 5427 Still running and the Status indicates "Receiving -278" now. Eric NO3M On 05/27/2015 05:15 PM, Joe Taylor wrote: > Hi Eric, > > I have not answered your queries about failure to transmit in WSPR mode > because so far I have not been able to reproduce the problem. > > As reported here a number of times, I (and a number of others) have been > happily WSPRing with WSJT-X v1.6 for about two weeks. I've observed no > reluctance of the program to transmit. > > Can you provide details on exactly what you are doing, and how you are > configured? > -- Joe, K1JT > > ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
