On 05/07/2015 23:59, Michael Black wrote:
Hi Mike,
And I can also confirm.
From None or Fake It to Rig turns split on when exiting Configuration.
Rig Split to Fake It turns off split mode when exiting Configuration.
I am not near a rig at present so I can't test this right now, can you
confirm that when you get the inconsistency it will actually transmit
SPLIT if you initiate Tx?
So why doesn't Rig Split to None turn it off too? I think this needs
to be consistent.
I agree but this area is horribly complicated due to various rig
inconsistencies, it is possible that it can be sorted out but I have to
tread very carefully as it can't be easily re-tested on all the rigs so
far verified.
73
Mike W9MDB
73
Bill
G4WJS.
*From:*Michael Black [mailto:mdblac...@gmail.com]
*Sent:* Sunday, July 05, 2015 4:40 PM
*To:* 'WSJT software development'
*Subject:* RE: [wsjt-devel] rig_get_split_mode
Got the get_split_mode implemented and it appears the FT-991 is fully
functional now in both Fake It and Rig split. I've got one
WSPR-tester in France and a JT65/JT9 guy in Arizona both testing
successfully now (the WSPR guy doesn't really care about split mode
though).
I'm still seeing the problem though when changing from Rig to None on
split. One way works…None-to-Rig…turns on split when exiting
Configuration. The other way Rig-to-None does not turn off split when
exiting Configuration…but does fix itself on program restart.
This is true for the FT-991 and for my Omni VII too so I have two rigs
exhibiting this behavior.
I'm trying to trace it down but having a hard time following the logic
where Configuration exit triggers split=1 but not split=0
73
Mike W9MDB
*From:*Bill Somerville [mailto:g4...@classdesign.com]
*Sent:* Sunday, July 05, 2015 9:12 AM
*To:* wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
*Subject:* Re: [wsjt-devel] rig_get_split_mode
On 05/07/2015 14:56, Michael Black wrote:
Hi Mike,
This code section is causing some problems with Yaesu hamlib entries
if (rationalise_mode)
{
rmode_t current_mode;
pbwidth_t current_width;
error_check (rig_get_split_mode (rig_.data (),
RIG_VFO_CURR, ¤t_mode, ¤t_width), tr ("getting mode of
split TX VFO"));
TRACE_CAT ("rig_get_split_mode mode = " <<
rig_strrmode (current_mode) << "bw =" << current_width);
auto new_mode = map_mode (state ().mode ());
if (new_mode != current_mode)
{
TRACE_CAT ("rig_set_split_mode mode = " <<
rig_strrmode (new_mode));
error_check (rig_set_split_mode (rig_.data (),
RIG_VFO_CURR, new_mode, RIG_PASSBAND_NORMAL), tr ("setting split
TX VFO mode"));
// do this again as setting the mode may change
the frequency
error_check (rig_set_split_freq (rig_.data (),
RIG_VFO_CURR, tx), tr ("setting split TX frequency"));
}
}
The "rig_get_split_mode" is only defined for the FT920. So all
others (I'm working on the FT-991 right now) are getting an error
Sat Jul 4 22:54:24 2015
GMT(C:\JTSDK\src\wsjtx\Configuration.cpp:2338)Debug:
Configuration::handle_transceiver_failure: reason: "Hamlib error:
Feature not available while getting mode of split TX VFO
"
That error shouldn't happen. For rigs where the "other" VFO mode can
be directly queried get_split_mode() should be implemented, for rigs
that can't, the front end function rig_get_split_mode() assists by
swapping VFOs and using a normal mode query. The caps->targetable_vfo
flags should control this behaviour.
What value do you currently have for caps->targetable_vfo for the
FT-991? The FT-991 has the "OI" query but no command to set the
"other" VFO mode so I think it must be RIG_VFO_TARGETABLE_FREQ only.
73
Mike W9MDB
73
Bill
G4WJS.
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
