Hi Bill,
Some additional info. I found that with the Radio set to Split mode,
starting WSJT-X with "Monitor off at startup" leaves the radio in Split
mode. The radio stays in SPlit mode if Monitor is clicked manually.
If "Monitor off at startup" was unchecked at the time of previous
program exit, restarting WSJT-X immediately switches the radio out of
split mode.
Does this make sense? Is there a good reason for the program to do this?
-- Joe
On 9/15/2015 10:47 AM, Joe Taylor wrote:
> Hi Bill,
>
> As you may have noticed, I'm having a devil of a time getting the
> "CQ nnn ..." messaging to work properly. I want to be sure that I
> handle split mode (either "Rig" or "Fake it") in the right way.
>
> I may have some more specific questions about the cod3e for you soon,
> when I finish formulating them. Right now, though, here's one that has
> me perplexed:
>
> I set the radio (in this case an FT-2000) to Split mode, then start
> WSJT-X. Under some startup conditions (I'm in JTMSK mode) , the program
> immediately sets the radio to non-split mode. I haven't been able to
> isolate the setting (presumably in the .ini file) that causes this.
>
> Is there a simple answer to "Under what conditions should WSJT-X switch
> the radio from Split to non-Split mode?
>
> -- Joe, K1JT
>
> ------------------------------------------------------------------------------
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
