Hi Mike Thanks for answering.
I have tried pulseaudio an got TX work properly (I can press "Tune" button several times and I got always an audio tone) but I cannot make it work in RX, I do not know the reason. I have googled around and perhaps there is a bug in pulseaudio related to my Maudio Fast Track Pro USB card. I cannot get audio input from the sound card. I have also tried several settings in /etc/modprobe.d/fast-track-pro.conf with no luck: # 24 BIT - 44.1/48 KHz - 2 INPUTS (ANALOG) - 4 OUTPUTS (ANALOG + DIGITAL) - THIS IS THE DEFAULT AND ENABLED: #options snd_usb_audio vid=0x763 pid=0x2012 device_setup=0x9 index=5 enable=1 # 24 BIT - 88.2/96 KHz - 4 INPUTS (ANALOG + DIGITAL) OR 4 OUTPUTS (ANALOG + DIGITAL) - DUPLEX IS NOT SUPPORTED #options snd_usb_audio vid=0x763 pid=0x2012 device_setup=0x5 index=5 enable=1 # 24 BIT - 44.1/48 KHz - 2 INPUTS (DIGITAL) - 4 OUTPUTS (ANALOG + DIGITAL) #options snd_usb_audio vid=0x763 pid=0x2012 device_setup=0x13 index=5 enable=1 # 16 BIT - 44.1/48 KHz - 4 INPUTS (ANALOG + DIGITAL) - 4 OUTPUTS (ANALOG + DIGITAL) options snd_usb_audio vid=0x763 pid=0x2012 device_setup=0x0 index=5 enable=1 Also played with this settings in /etc/pulse/daemon.conf with no luck: ; default-sample-format = s16le ; default-sample-rate = 48000 ; alternate-sample-rate = 44100 Anyway, my desire was using the card without pulseaudio as I do with FLDIGI with no problems. I do not know the reason but WSJT-X fails at the second or third TX attempt. I can make any test you wish to fix this, or if the bug is not inside WSJT, find who is the culprit. Thanks. Ramiro. EA4NZ. El 06/01/16 a las 23:10, Black Michael escribió: > Doesn't really sound like a problem with WSJT-X then. WSJT-X knows > nothing about which sound card you're using (at least as far as the > software logic goes). > > Why don't you try pulse audio and see if it works with that? That > creates a virtual audio port you can hook up to and seems to work for > others. > > RRR > Mike W9MDB > > > ------------------------------------------------------------------------ > *From:* Ramiro Aceves <ea1...@gmail.com> > *To:* wsjt-devel@lists.sourceforge.net > *Sent:* Wednesday, January 6, 2016 4:01 PM > *Subject:* Re: [wsjt-devel] Possible bug in WSJT-X > > Hi Mike, > > I have just tested with my laptop internal sound card and "Tune" button > works fine. No problem at all, I get audio tone whenever I press "Tune". > > Thanks. > > Ramiro. EA4NZ. > > > > El 06/01/16 a las 22:01, Black Michael escribió: > > Do you have another sound card you can test? Perhaps your regular audio > > card? > > > > RRR > > Mike W9MDB > > > > > > > > ------------------------------------------------------------------------ > > *From:* Ramiro Aceves <ea1...@gmail.com <mailto:ea1...@gmail.com>> > > *To:* wsjt-devel@lists.sourceforge.net > <mailto:wsjt-devel@lists.sourceforge.net> > > *Sent:* Wednesday, January 6, 2016 2:57 PM > > *Subject:* [wsjt-devel] Possible bug in WSJT-X > > > > Hi all, > > > > I am using wsjt-x v1.6.0 from wsjtx_1.6.0_amd64.deb Debian package. > > Operating system is Debian GNU/Linux Jessie stable. Sound card is Maudio > > Fast > > Track Pro USB and I am using the card directly via ALSA snd_usb_audio > > driver. > > > > When I press "Tune" button I get a proper audio output tone, when I > > press "Tune" button for the second time I get a proper audio tone, but > > when I press it for the third time I get no output tone. The same occurs > > for the normal TX periods. The first two TX periods work but the third > > one does not work. Audio ouput no longer works after that. Restarting > > wsjt-x returns to the beginning and audio works. > > > > I do not know what is happening but this makes wsjt-x useless for TXing > > here. > > > > Fldigi software works fine using with this setup. > > > > Thanks so much in advance. > > > > Ramiro, EA4NZ. > > > > > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > <mailto:wsjt-devel@lists.sourceforge.net> > <mailto:wsjt-devel@lists.sourceforge.net > <mailto:wsjt-devel@lists.sourceforge.net>> > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > <mailto:wsjt-devel@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
