On 15/01/2016 12:31, Paul wrote: > Can any one tell me if the IQ software will be added to wsjtx. Hi Paul,
it is not currently being worked on. In general there are two related issues with using IQ data, firstly it has to be "demodulated" and secondly the mode and frequency of demodulation needs to be set. These equate roughly to setting the dial frequency and mode on an analog rig. Most receiver implementations that provide IQ data have some sort of CAT interface to set their LO frequency and a separate SDR application is needed to demodulate to audio. AFAIK all these SDR applications provide a CAT interface that emulates some analog rig. Therefore running an SDR application meets all the requirements for WSJT-X. I suggest that you investigate using HDSDR or similar as an intermediary between the receiver (and transmitter) and WSJT-X. We have made allowance in the WSJT-X/Hamlib sources to make them work with HDSDR when the TS-2000 rig type is used. You cannot use split operating for JT9+JT65 dual mode but that should not be necessary with an all digital audio chain and the ability to select 4kHz wide filters for Rx and Tx. 73 Bill G4WJS. ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
