On 22/01/2016 15:52, James Shaver (N2ADV) wrote: > I just compiled 1.7.0 devel r6418 and I am running Windows 10 Home 64 bit and > using HRD 6.3.0.466 for CAT Control. > > I'm getting a "Rig Control Error" on startup. More details as follows: > > I usually use "Fake it" for the "Split" setting because that seems to work > best with my Elecraft K3. This is because if I use "rig" instead, the K3 > hops in and out of "Split" mode randomly. If I select "none" the power > delivery is not smooth, especially close to the edges of the passband (which > you all know:) ). This worked quite well until the recent build where "Fake > it" now throws the K3 into "split" mode when I start WSJT-X which then causes > a "Rig Control Error" stating "Emulated split mode requires rig to be in > simplex mode" which has never happened before. Usually when "fake it" is > selected, the rig remains in simplex mode and there are no issues. > Hi Jim,
I can't see anything obvious, that has changed recently, that would have caused this issue. If you contact me off list I can explain how to make an instrumented build that will help diagnose this. 73 Bill G4WJS. ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
