Don't know if it helps any....but "Test Cat" does not change the bandwidth. Then closing the settings window does.
RRR Mike W9MDB On Wed, Apr 6, 2016 at 4:11 PM, Bill Somerville <g4...@classdesign.com> wrote: > On 06/04/2016 20:45, Michael Black wrote: >> None does not touch anything as expected. >> I've been running in USB mode for ages and never had this problem >> before. I always run 4500hz bandwidth. >> Not a big deal to make the choice on the rig and stick with None. But >> if it should be ignoring the bandwidth then the patch would be >> preferable. > Hi Mike, > > mysterious, I've no idea why you have not seen this before now. > > It is something that needs a better solution. Now I have cleared the > decks a bit here I think I will add a config option to Hamlib and go > through setting the World right with all the back ends such that with > the option off they set the first specified bandwidth for the mode when > given RIG_PASSBAND_NORMAL which is the intended and documented > behaviour. With the option on that parameter will leave the bandwidth > untouched apart from the couple of rigs where there is no choice. > > 73 > Bill > G4WJS. > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel