Not sure if it helps but I use "fake it" with my K3 and it works quite well.
Jim S. N2ADV > On Jul 12, 2016, at 6:39 AM, Bill Somerville <g4...@classdesign.com> wrote: > >> On 11/07/2016 12:38, Bob KD7YZ wrote: >> If I select Split-Rig in WSJTx; setup K3 to Split; Set DxCommander to >> Split > > HI Bob, > > the statement you made above is confusing me, it implies that you are > manually setting split on your K3 and also in DX Lab Suite Commander. > You should not need to do that if you have "Settings->Split Operation" > set to "Rig" in WSJT-X, it should all be automatic. > > Can you confirm that if you set WSJT-X "Settings->Split Operation" to > "Rig" then both the rig and DX Lab Commander indicate the SPLIT is > enabled. You may need to cause a Tx frequency change or transmission for > this flow right through to the rig, the simplest way to trigger the > synchronization is to CTRL+Click on the waterfall at least 500Hz away > from the current Tx cursor (the red one). > > 73 > Bill > G4WJS. > > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity planning > reports.http://sdm.link/zohodev2dev > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel