Hi Richard, I agree with Bill on this. The problem appears to the same as you had before. I have the Lanchpad version of RC3 ready to posted, but that is not solving the problem at hand.
Are you sure you followed the steps / process posted in: https://sourceforge.net/p/wsjt/mailman/message/35014724/ I have added all the required build dependencies to all the JTSDK Meta Pakcages and the WSJTX-NEXT package on Launchpad. If the package builds properly on Launchpad, that clearly indicates a problem on the local build platform, e.g. your installation. As a side note, I've also built WSJT-X using Pbuilder (Debian / Ubuntu bootstrap image) on my Linux workstation without error. To my knowledge, there has been no changes from RC2 to RC3 that would be casing this problem. I do not believe this to be a problem WSJT-X, nor with the JTSDK build scripts. You have to remember, the JTSDK bash scripts are nothing more than a "very thin layer" between the user and required Cmake commands to build WSJTX. If your package dependencies are correct, you could easily perform the same or similar build commands manually on the command line. JTSDK is not required, in any capacity, to build WSJT-X on any platform. 73's Greg, KI7MT On 12/6/2016 5:48 PM, Richard Bown wrote: > more info > > I'm getting many errors like this on building:- > /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2138:5: error: > ‘::glVertexAttribPointer’ has not been declared > ::glVertexAttribPointer(indx, size, type, normalized, stride, ptr); > > I've loaded all qt5 libs, all fitting vertex* all *libgl* all *gles* , about > 800 MB , its not > playing !! > before each build jtsdk/wsjtx is deleted so its a clean build. > Guess I'll have to wait until Greg builds an ARMhf rc3 > This is not going to build on the odroid xu4 without some magic applied > > > > On Tue, 6 Dec 2016 23:26:36 +0000 > Richard Bown <rich...@g8jvm.com> wrote: > >> this is not responding to deleting all previous builds and gar/ >> >> tried that several times :( >> >> >> On Tue, 6 Dec 2016 21:49:32 +0000 >> Bill Somerville <g4...@classdesign.com> wrote: >> >>> On 06/12/2016 21:29, Richard Bown wrote: >>>> I suspect the problem may be with opengl >>>> comparing between the two machine, on the ARM I get many jopengl errors >>> Hi Richard, >>> >>> this seems to be a re-run of this thread: >>> >>> https://sourceforge.net/p/wsjt/mailman/wsjt-devel/thread/20160414184913.209df085.richard%40g8jvm.com/#msg35014162 >>> >>> that seemed to be cleared up by some clean up and re-building. >>> >>> 73 >>> Bill >>> G4WJS. >>> >>> >>> ------------------------------------------------------------------------------ >>> Developer Access Program for Intel Xeon Phi Processors >>> Access to Intel Xeon Phi processor-based developer platforms. >>> With one year of Intel Parallel Studio XE. >>> Training and support from Colfax. >>> Order your platform today.http://sdm.link/xeonphi >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> > > ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
