Hi all, First, I would like to thank you all for those great improvements, and new modes in version 1.7
I found a strange behaviour with the last rc3, but first let's see how I use it : - I am active on VHF but with a transverter 28 to 144 MHz. - I configured the frequency offset of 116 MHz as it should be. - I have a Microkeyer II interface that controls the CAT communication. - All of the above runs under Windows 10. When the program starts, it is set as in the 10m band, so I have to move to the 2m band manually. It looks like WSJT-X reads the frequency (10m band) and setup the program accordingly without taking any notice of the transverter. >From rc3, I have also a window that alerts me about the VHF features being activated, and the transceiver set to HF bands (10m). Of course this is not true, as I always use the transverter. Switching manually to the 2m band clears the problem, and the program runs normally afterwards. Very 73 Patrick, F1EBK ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
