Hi all, My first idea was to have a try on 6m MSK-144 as I saw reports on : http://www.dxmaps.com/ showing that there is some activity on 50.280 MHz
My setup : Windows 10 WSJT-X 1.7 interface Microkeyer II. TRX : FT-2000 (cat control activated via the interface). At this point, I would like to point out that the Microkeyer II is doing the digitalisation of the audio, and that the audio is sent to the computer by the mean of an USB cable. Windows 'see' an extra audio interface, just as any audio interface, no trick had been used at this point, WSJT-X is using the audio given by this new interface. Software setup : The VHF/UHF microwave feature is enabled. This configuration (except the VHF/UHF features) had been used without any problem on HF, in JT65 and JT-9. Now, if I start WSJT-X in MSK-144 with a 30s period, the graph fills up, but never reach the 30s, it stops between 22 and 26, sometimes 28s, but never completes. I don't now if I did something wrong, but any idea would be welcome. Very 73 Patrick, F1EBK ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
