El 01/03/17 a las 01:25, [email protected] escribió: > In the WSJT-X rig selection you use "Hamlib NET rigctl".? > First, start rigctld-wstx like you did before. ?When you select the rig as > above you'll see it connect and messages start flowing.That's the capture I > need...you'll probably want to send it as an attachment as it can get quite > long. > de Mike W9MDB
TU Mike, Nice feature this of using rigctld...I did ignore it ! it goes in timeout straight. --------------- icom_init: civ_version=1 rig_set_conf: civaddr='0x94' rig:rig_open called Opened rig model 373, 'IC-7300' Backend version: 0.7.2, Status: Stable Connection opened from localhost:49024 rigctl(d): 'currVFO' '' '' '' rigctl(d): v 'currVFO' '' '' '' rigctl(d): v 'currVFO' '' '' '' rigctl(d): f 'currVFO' '' '' '' write_block(): TX 6 bytes 0000 fe fe 94 e0 03 fd ...... read_string(): Timed out 1.558 seconds after 0 chars write_block(): TX 6 bytes 0000 fe fe 94 e0 03 fd ...... read_string(): Timed out 1.979 seconds after 0 chars write_block(): TX 6 bytes 0000 fe fe 94 e0 03 fd ...... read_string(): Timed out 1.1050 seconds after 0 chars write_block(): TX 6 bytes 0000 fe fe 94 e0 03 fd ...... read_string(): Timed out 1.1051 seconds after 0 chars Connection closed from localhost:49024 ---------------------- 73 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
