Yep I had the same issue. If memory serves, HRD was not reporting back to the K3 to not go into Split mode.
73, Jim S. N2ADV > On Jul 10, 2017, at 3:51 PM, Jim - N4ST <newsgr...@jimpricejr.com> wrote: > > It may well be an "HRD thing", but it only happens when I tell WSJT-X to > "FAKE IT". With this not selected the K3 doesn't go split on WSJT-X > initialization. > > ________ > 73, > Jim - N4ST > > -----Original Message----- > From: James Shaver (N2ADV) [mailto:n2...@windstream.net] > Sent: Monday, July 10, 2017 14:30 > To: WSJT software development <wsjt-devel@lists.sourceforge.net> > Subject: Re: [wsjt-devel] K3S Going Split??? > > I had this happen last year sometime with my K3. Bill and I were on Skype a > couple times trying to track down the cause - ultimately we determined it > was an HRD thing. My solution was to dump HRD. > > Not very helpful, I know (sorry) - maybe you'll have better luck tracking it > down. > > Jim S. > N2ADV > >> On Jul 10, 2017, at 2:18 PM, Jim - N4ST <newsgr...@jimpricejr.com> wrote: >> >> I have the issue that when I start WSJT-X, or change configurations, it > puts my Elecraft K3S in split mode. That causes the WSJT-X CAT comms to > fail because I have "FAKE IT" selected and that mode cannot initiate when > the rig is already in split mode. WSJT-X is setup to communicate with HRD > 6.4.x as the controller for the K3S. A quick push of a macro button on the > K3S cancels the split mode allows WSJT-X CAT comms to initiate properly. >> Anybody else seen this? >> >> Windows 10, WSJT-X r7838, HRD 6.4.0.659 >> >> P.S. - It would be totally awesome if WSJT-X configurations changes could > optionally send out user defined macros over the CAT channel. >> >> _______ >> 73, >> Jim - N4ST >> > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
