Hi Bill:
Usually I try to look into code changes. Will be more aware of monitoring
code changes comments.
Thanks!
Edfel
KP4AJ
On Sat, Jul 22, 2017 at 6:20 PM, Bill Somerville <[email protected]>
wrote:
> On 22/07/2017 20:47, Edfel Rivera wrote:
>
>> Thank you Mike! After fixing PC time, decoding properly now.
>>
>
> Hi Edfel,
>
> Steve, K0AN, has tightened the time synchronization requirements for the
> FT8 decoder. The change seemed sensible given the shorter T/R period,
> higher proportion of the T/R period that is message, and faster code rate.
> Having a smaller sync detection tine interval makes the decoder either
> faster or able to look a bit harder for a signal to try and decode.
>
> https://sourceforge.net/p/wsjt/wsjt/7926/
>
> If you are build from sources and intending to use WSJT-X on air, it is
> essential to track the change history to understand what you might be
> running. This particularly true at the moment if you build the development
> branch rather than the v1.8 branch.
>
> 73
> Bill
> G4WJS.
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
