Settings/Frequences right-click and Reset
Seems to me we need to detect this and provide a dialog to notify and reset
when no frequencies are loaded.
It would be super-nice if previous edits weren't lost but that's probably
asking too much.
de Mike W9MDB
From: Scott Bidstrup <[email protected]>
To: [email protected]
Sent: Saturday, September 2, 2017 9:38 AM
Subject: [wsjt-devel] RC2 bug report
Gentlemen,
I have downloaded and installed the RC2 release software, and am
delighted to report that, for the most part, it is working.
One problem I have noted, though, is that the drop-down frequency list,
in all modes, seems to be missing in the new version (downloaded from
sourceforge) - it's stuck on the last frequency I used in the old
version, and can't be changed so far as I know. Mark and replace does
not work, and there's nothing at all in the drop-down list in any mode
to select from.
Since I can't change the frequency, this is a serious problem for
logging and reporting. Is there a quick and easy fix for this? Please
don't tell me I'm going to have to manually enter ALL the frequencies
for ALL the modes... Not sure I have that much patience.
Scott Bidstrup
TI3/W7RI
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
