Still can't reproduce....You'll find message_aggregator in the bin folder.  It 
receives the UDP packets too so should show what you see too.
If you're seeing bad info in what JTAlert receives than this should show it 
tooI tested logging from the two VK* configs and it works as expected.




de Mike W9MDB
 

    On Friday, June 29, 2018, 12:09:16 AM CDT, Laurie, VK3AMA 
<[email protected]> wrote:  
 
  Attached
 
 de Laurie VK3AMA
 
 
 On 29/06/2018 2:41 PM, Black Michael via wsjt-devel wrote:
  
    I just tried this and see the correct answer for the logging packet.  
  
   Here is part of the two packets I got for logging from each config where the 
station callsign is correct for that config W9MDB and W9MDB/QRP 
  Can you send the WSJT-X.ini file? 
         0x0120:  3020 3c73 7461 7469 6f6e 5f63 616c 6c73  0.<station_calls
         0x0130:  6967 6e3a 353e 5739 4d44 4220 3c6d 795f  ign:5>W9MDB.<my_
         0x0140:  6772 6964 7371 7561 7265 3a34 3e45 4d34  gridsquare:4>EM4
          0x0150:  3920 3c45 4f52 3e                        9.<EOR> 
          0x0120:  3020 3c73 7461 7469 6f6e 5f63 616c 6c73  0.<station_calls
         0x0130:  6967 6e3a 393e 5739 4d44 422f 5152 5020  ign:9>W9MDB/QRP.
         0x0140:  3c6d 795f 6772 6964 7371 7561 7265 3a34  <my_gridsquare:4
         0x0150:  3e45 4d34 3920 3c45 4f52 3e              >EM49.<EOR>
    
      On Thursday, June 28, 2018, 7:52:33 PM CDT, Laurie, VK3AMA 
<[email protected]> wrote:  
  
     It looks to me like the station_call conveyed in the UDP Logged QSO packet 
is not being updated when switching configurations  where the alternate 
configuration specifies a different station callsign. The wsjtx_log.adi has the 
correct callsign after config switching.
 
 Steps to reproduce the defect...
     
   - Create two configurations in WSJT-X, each with a different station 
callsign.
   - Log a QSO, the adi file matches the station_call conveyed in the UDP 
logged QSO packet.
   - Switch configurations.
   - Log a QSO, the adi file correctly has the new station_call, but the UDP 
packet is still using the station_call from the  first configuration.
 
de Laurie VK3AMA
 
 
  ------------------------------------------------------------------------------
 Check out the vibrant tech community on one of the world's most
 engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot_______________________________________________
 wsjt-devel mailing list
 [email protected]
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel
     
  
 ------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
  
 _______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
 
 ------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to