Please do send the excerpt and a few 100 lines preceding when it happened.
de Mike W9MDB
On Friday, June 29, 2018, 7:29:18 PM CDT, David Fisher
<dsfis...@outlook.com> wrote:
I worked KH1/KH7Z yesterday on a couple of bands successfully, in Hound mode.
But before I was successful, I had the following happen:
I set Hound mode, then shut the program down. I restarted it, watched messages
go by for a while, then started transmitting my call. After a bit I got a
message via JTAlertX from another OM that I was transmitting at the wrong time,
on the 00 and 30, instead of on the 15 and 45. Given that the program was in
Hound mode, I couldn’t change the transmit “phase”. So, I shut the program
down, started it again and resumed transmitting. This time it transmitted on
the 15 and 45 and I worked the DX station a few minutes later.
I have the “ALL LOG” excerpt of this if you want to see it. You’ll have to
take my word on the rest.
The code version is 1.9.0-rc4 R8642. I built it from source a while back.
Is this, was this, a known bug?
Dave / NX6D
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
