Hi All,I had 12 QSOs on 20m as follows: QSO: 14078 RY 2018-09-27 0202 XE1MEX 569 0001 KK6NON 559 CAQSO: 14078 RY 2018-09-27 0204 XE1MEX 579 0002 K6LL 579 AZQSO: 14078 RY 2018-09-27 0205 XE1MEX 549 0003 7L4IOU 549 0001QSO: 14078 RY 2018-09-27 0210 XE1MEX 549 0004 N6VV 549 CAQSO: 14078 RY 2018-09-27 0212 XE1MEX 549 0005 K5CM 539 OKQSO: 14078 RY 2018-09-27 0217 XE1MEX 559 0006 K6EU 529 CAQSO: 14078 RY 2018-09-27 0219 XE1MEX 549 0007 W6ZL 579 CAQSO: 14078 RY 2018-09-27 0221 XE1MEX 539 0008 W6RC 539 CAQSO: 14078 RY 2018-09-27 0222 XE1MEX 539 0009 AA6OC 559 CAQSO: 14078 RY 2018-09-27 0225 XE1MEX 559 0010 LW2EIY 559 0006QSO: 14078 RY 2018-09-27 0228 XE1MEX 559 0011 ZL3GAV 549 0002QSO: 14078 RY 2018-09-27 0230 XE1MEX 569 0012 K6XX 559 CAQSO: 14078 RY 2018-09-27 0257 XE1MEX 569 0001 VK7XX VK7XX RR73 I noticed that some call signs of already worked stations (7L4IOU by example) were still displayed in a brown color instead of the usual green. This happened sometimes in previous software versions and after closing the program and re-opening it all went ok. Then at 02:32 UTC I did the same procedure but in this case the worked station call signs remain in brown color. That makes difficult to identify the already worked call signs in longer contests. The worst is that QSO counter was reset and even manually I could not change the generated message. If I change manually to 0013, the program reset it to 0001 as soon as the tx is switched on. I expected that QSO counter would continue generating progressive numbers even if the program is closed and re-opened. Perhaps this is an issue only for DX stations using progressive numbers in the exchanged reports. And in my case all sent and received reports were written as 0 (zero) in the log. 73Alex, XE1MEX
| | Libre de virus. www.avast.com |
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
